The goal of our system is to keep your hands at the ideal temperature of around 33 degrees Celsius, regardless of the type of weather; from the cold, wind, and the rain. All boxes checked.

Exkin Platinum® is an extremely lightweight, soft and warm, non-woven, multilayer structure that reflects radiant heat downward to the user’s hand, without adding vexatious bulk. 

PrimaLoft® Gold is a synthetic insulation solution, made to mimic the heat retaining qualities of down but in hypoallergenic form. And unlike down, PrimaLoft® Gold does not hold moisture, it’s easily packable, and it’s lightweight. 

The THERMOTRONIC system features four different heating levels that can easily be adjusted with the large button on the upper side of the gloves. Thanks to the illuminated coloured ring around the button, it’s very easy to check the level your gloves are currently operating at.

The heated Freedom H2O motorcycle gloves have been specifically designed to convey a sleek and elegant look and feel, yet they incorporate our high-tech THERMOTRONIC technology system.

The THERMOTRONIC features 4 different heating levels (from higher heat to lower heat) that can easily be adjusted with the large button on the upper side of the motorcycle glove. Thanks to the coloured ring around the button, it’s very easy to see what level your motorcycle gloves are currently set at.

The outside of the motorcycle gloves is constructed with flexible softshell material on the upper, and grippy leather on the inside of the hand. Their synthetic lining is combined with Exkin® Platinum® insulation and instantly provides a clear sense of comfort and protection against the cold. By using a soft impact protection knuckle, the motorcycle gloves are more comfortable to wear but will still offer a high level of armour. Thanks to the hydratex|Z-liner construction, 100% waterproofing is guaranteed.

Additionally, reflective stripes and logos are added to the top of the hand for increased visibility, without disturbing the clean and fresh look of the Freedom H2O motorcycle gloves. And let’s not forget the inclusion of the Connect Finger Tip fabric that allows you to operate touchscreens without removing your hand protection, especially when it’s cold out.

Your hands stay comfortable with the Freedom H2O motorcycle gloves.

Adjustability

Adjustment strap at wrist
The hook-and-loop adjustment strap at the wrist allows for optimum adjustability and fit when using our gloves. Find the ideal tightness and comfort every time it is used.

Stretch at fingers

Closure

Elastic drawcord at cuff
Elastic drawcord to adjust fit of the cuff of the glove.

Wrist strap

Lining

High loft fur liner
This type of insulation mimics the natural insulation properties of animal fur, a high loft construction; containing more air then fibre; it is a type of natural insulation that traps in the heat.

Tri-fleece liner
This polyester tricot fabric is used for glove lining, and brushed to provide extra warmth without adding any bulk. The lining wicks moisture away, to prevent hands from getting damp.

Features

Battery set REV'IT! Thermotronic heating technology
Set containing two 7.4V batteries and micro-USB lead.

conductive fingertip at index finger
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.

conductive fingertip at thumb
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.

Long cuff

Visor wiper
The material used on the index finger of the glove has a visor wipe function. It helps clear water or moisture off the visor for better visibility when riding in wet weather.

Waterproofing

hydratex|Z-liner
A waterproof layer is laminated onto a carrier to construct the REV’IT! hydratex|Z-liner membrane. The carrier, in turn, protects the membrane against wear-and-tear damage, and the seams of the membrane are taped to ensure waterproofing. The Z- liner is constructed between the lining and the outer shell. The REV’IT! hydratex|Z-liner membrane is used in garments that demand a high level of all-weather protection.

Insulation

Exkin® Platinum® insulation material

Fixed REV'IT! Thermatronic heating technology system
Integrated 7.4V circuit heating system with adjustable heating levels.

Thermal insulation

Protection

PWR|Shield at palm
PWR|Shield is created with a unique knit technique which results in a fabric with unsurpassed cut, tear and abrasion resistance levels. This product is equipped with PWR|Shield at the palm.

Temperfoam® palm slider

Visco-elastic knuckle
These knuckle protectors are made from visco-elastic rubber. This material ensures the knuckles are protected, while the elasticity allows the hand to move naturally and in full comfort.

Outer shell material

Connect finger tip fabric
Never take off your gloves again to answer your phone or navigation system. The connect fingertip has been specifically designed to operate touch screens.

Flock PU
Flocking is the process of adhering small fibre particles (called flock) onto a surface. This process creates a texture that picks up water.

Goatskin drum dyed with WR finish
Twill stretch
Softshell 3L
Taslan

Visibility

laminated reflection at back hand
laminated reflection at finger

WASH & CARE

Outershell

	Do not wash
	Do not bleach
	Do not tumble dry
	Do not iron
	Do not dry clean

 

CERTIFICATION

These gloves are certified according to the EN 13594 Standard, published in 2015 and have achieved level 1 KP rating.